Readings you can look up and a history, not just a number on a display.
IoT & data / INTERNET OF THINGS
The physical world.Finally readable.
A temperature that changes, consumption that climbs, a device that stops responding. We connect sensors and software to make these signals useful.
Explore what we do ↓A connected space
SIMULATED CONTROLS
Loading the view…LIVING ROOMLights offShutters open
Readings within the demo range
Values are logged. Real thresholds are defined for your space.
No command run yet.No real device connected. The images show the eight simulated states of lights and shutters.
WHEN IT HELPS
This is for you if…
- 01
To know what is happening in a space you have to go there in person.
- 02
You find out about an out-of-range value afterwards, from the damage.
- 03
You already have sensors, but the data doesn’t reach the people who decide.
What changes, in practice
Thresholds and alerts sent to whoever can act.
A device that stops responding becomes visible, instead of looking like a space with no problems.
Results expected from the project, not measurements of delivered work.
Where you start
To know what is happening in a space, someone has to go there. A manual check only tells you about that moment.
The change to design
Readings you can look up, a history and alerts sent to whoever can act. Missing data becomes visible too.
INSIDE THE PROJECT
A concrete need.
Its own workspace.
“I want to know when conditions change.”
We start from the useful measurement, the sensor’s position and the frequency needed. Then we test collection, history and thresholds.
What we design together
01
Choosing what to measure and which devices to use
02
Data collection and a history of readings
03
Thresholds, alerts and detection of offline devices
04
Prototype and on-site testing before operational use
New custom development: devices, compatibility and installation conditions are verified with a prototype.
Let’s start hereINTERACTIVE DEMOS
Examples built in this area
THE FIRST STEP